Computers and Technology
What shouId do if my hard drive cannot be detected by your computer?
Have you ever encountered a situation where your computer could not recognize your hard drive? As we all know, data is stored exactly on the hard drive. Thus, if the hard drive cannot be detected, it means that data will be unavailable. Most people think that this type of case stems from device errors. So they tend to return to the hard drive recovery service, which is just like using corrupt PST repair tools to fix compromised PST files.
Data is actually stored on the internal hard drive. So if the hard drive cannot be detected by your computer, you will not be able to access your data. This article will look at this issue and teach you what to do if you are facing such a case.
Sometimes, however, the problem may not be due to device errors, but some other issues, such as incorrect operating system configurations, loosening data cable and file corruption, and so on. Therefore, you should take some steps to figure out the culprits when you come across this question. Follow the steps below.
Read also: Planning Office Technology Budget in 2021
1. Check if the hard drive is turned on
First of all, you need to check the computer’s system settings to identify if the system has the hard disk turned on. You can press the “F2” key on regular computers to access the system settings interface to determine and change related settings. If you think the switch is “Off”, turn it on. If the switch is already “On” but the hard disk still cannot be detected, proceed to the next step.
2. Examine the data state
Cable: There is a good chance that the connection between the motherboard and the hard disk is incorrect. This means that data cabDu may come loose or be damaged. Therefore, you should proceed to the data state cable. If it is corrupt, you will need to replace it with a new one. Assuming the problem persists after using a new cable, go to the following steps.
3. Determine if the hard disk is spinning
For the traditional hard drive, it spins when it works. Therefore, you should find out if it is spinning. In general, you can get close to the computer case to hear or feel if there is any slight vibration. In this case, the unit must rotate. If not, you should consider whether your computer is getting enough power for the hard drive to work. Assuming that the unit cannot spin up, it is very likely that it has been physically damaged. In this scenario, you will probably need to use the hard disk recovery service.
4. Delete all data on the hard drive
In addition, infected and damaged data on the device may also cause the device to malfunction. Then your computer may not be able to detect the device. In this case, you can simply delete all data on the device and later restore data from backups if you have a current backup. However, if you do not have an updated backup or if the backup is several months old, your last resort will be a reputable recovery service. Be careful when choosing a service provider as there are many unreliable ones in today’s market.
