DETERMINING YOUR SKIER TYPE – WHAT YOU NEED TO KNOW

Since the introduction of DIN-rated links, “skiing type” has confused skiers around the world. Used in conjunction with other personal features to determine the correct DIN for your links. What is it and why is it important?

Ski type is a rating chosen by a skier that describes his type of ski. It is a confusing combination of skill, preferred terrain, but mainly aggression. The trader cannot choose this level for you. It is up to you to decide and fully inform your binding technician so that he can configure your volumes correctly. Most runners fall into one of three categories (there are exceptions). Skiing Warning: It is not recommended to select the wrong type of skier to display. Loose fasteners increase the risk of spiral breakage and other injuries.

Type 1 skier:

Most, but not exclusively, type 1 skiers are beginners. They prefer easy and medium-difficult slopes without too many obstacles (blows, hills, jumps). They also prefer moderate speeds and never drive aggressively.

As a Type 1 skier, you need below-average adjustment settings to securely share your links in the event of a slow failure. This classification is not reserved for beginners. If you are a careful skier who never risks a fast ride, you can be an experienced type 1 skiing.

Type 2 skier:

A type 2 skier is someone who is neither type 1 nor type 3. Confused? It shouldn’t be. Type 2 skiers are those who do skiing at different speeds in different terrains. Drive the whole mountain, maybe you will quickly go to the slopes and take a slower path off the street.

You can be an experienced skier skiing with children. You can only be a weekend warrior, go out and ski at a moderate pace. Type 2 skiers need a medium trigger so that pushing is neither too hard nor too easy.

Type 3 skier:

Type 3 skiers are generally aggressive, but not only experienced skiers. They always prefer to drive on a medium to steep slope. If you are type 3, you will never run away or walk slowly. You burn everything.

While you are generally intermediate or experienced skiers, you can be a dealer who skiing like crazy (or a woman) and is type 3. Like type 3, you definitely need above-average postures. don’t push it out of your links unless you’re down. Accidental exhaust fumes can cause accidents and injuries.

Special cases:

Sometimes a skier may be excluded from the three standard classifications. Type -1 is for someone who needs an even lower setting than a Type 1 skier. Type 3+ is for someone who needs more than the Type 3 version. It can be someone who leaves steep slopes and curtains who can’t get from skis, unless absolutely necessary.

So how do you use it?

Only a certified link technician should configure your links. To determine DIN, they collect the height, weight, age, sole length (for ski boots of your choice) and type of ski. Your job is to give them the right information so they can do their job properly and keep you safe. Then read the DIN table and determine how much you need to configure the output on your links. If you are type 2, your DIN is exactly the same as the one listed on the card. If you are type 1 or 3, your DIN card will move up or down. If you are 9 or younger or 50 or older, your DIN will increase somewhere in the graph (lower setting).

When selling skis, the skier also takes your skiing style into account. Type 1 skiers generally do not need stiffer skiings. Also, consider using a shorter ski if you are between sizes and a type 1 skier, type 3 skiers generally need slightly stiffer skis. If you are a type 3 skier, a longer length may be recommended if you are between sizes.

If ou found this article informative. Then you must visit this site for more articles like this.