How to Choose the Right Size Fitted Cover for your Mattress
Choosing a mattress cover is not an easy task, neither rocket science, but there are a few things to consider before purchasing. One of the essential things to consider is the size of your bed. With so many different sizes available, one can quickly get confused about what to choose! You cannot only protect your mattress with a fitted cover but also make your mattress water-resistant with the waterproof mattress protector. However, this article breaks down the different types of covers and how they fit onto beds.
What is a mattress cover?
A mattress cover is a fitted sheet or blanket placed over your mattress to protect it from dust, spills, and other accidents. A good rule of thumb is to buy a size larger than what you think you need, as bedding products tend to shrink when aired out. Here are some tips on choosing the right size:
– Measure your mattress’s length and width (or depth)
– Compare those measurements to the size chart below
– Choose a size that is two inches larger than your mattress’s width and length, and one inch larger than its depth.
– If you have a memory foam mattress, go a size up. Foam mattresses tend to expand and contract in response to heat and cold.
– Remember that covers can be folded and stored away efficiently, so make sure the size you choose fits your needs.
Standard Mattress Cover:
Also called a Box Spring Cover. This is the most commonly used mattress cover to have on a mattress. It fits snugly over the top of the bed, and it helps to protect against dust mites, bacteria, and other allergens that can affect your health. The standard size is most commonly /found on twin, full, or queen-size mattresses.
Kid’s Size Mattress Cover:
These covers are specifically made for children’s beds. They are sized in one-inch increments, so there are different sizes for different age groups. This type of cover is not as durable, but it does allow for easier removal in case of spills and accidents.
There are many different types of mattresses that can be used for sleeping. The most important thing to consider when choosing a mattress is the material. When it comes to sleeping, everyone has their own preferences. Some people like soft sheets, others like hard ones. Some people like pillows that are flat, and others prefer those with a lot of stuffing. There’s really no wrong way to sleep, as long as you’re comfortable. However, there are some materials that are better for certain types of sleepers. Likewise, the fitted cover comes in different material like cotton, linen, polyester, and others. Choose the material that suits your sleeping.
What size fitted cover do you need for the bed?
Choosing the right size fitted bed sheets or cover for your mattress is crucial if you want your bed to last. Bedding comes in different sizes. Here we are mentioned a few tips to help you select the correct size:
– Measure the width and length of your mattress, and divide that number by two. That will give you the width of the cover you need.
– Measure the height of your mattress and divide that number by two. That will provide you with the length of the cover you need.
– Compare those two numbers to find your perfect fit. For example, if your width is 20 inches and your length is 26 inches, then you would choose a cover that is 24 inches wide and 30 inches long.
– Make sure the cover is tight enough, so there are no gaps between it and the mattress, but not so tight that it is uncomfortable to sleep on.
How long should the fitted cover be?
When shopping for a fitted cover for your mattress, it is essential to remember that the length of the cover should be proportional to the size of the bed. For instance, if you have a king-sized mattress, you need a king-sized fitted cover. If you have a queen-sized mattress, you need a queen-sized fitted cover. A common mistake people make is buying a short fitted cover when they have a queen-sized bed and expecting it to fit correctly. A fitted cover should be 18 inches long but preferably 24 inches long or longer. Good bedding is equal to peaceful sleep. That’s why always choose the right material and size for your bed to fit perfectly.
How to wash a fitted cover?
If you’re like most people, you probably don’t think much about how to wash a fitted cover. After all, they’re just a piece of fabric that covers your mattress! But if you care for your fitted cover well, it can last for many years and help protect your mattress from dust, dirt, and other allergens. Here are four tips to help you keep your fitted cover clean:
- Pre-treat any stains or spots before they become a problem. Sprinkle some baking soda on the stain; let it sit for a few minutes, then brush away the excess. Do this before each use to prevent problems in the future.
- Machine-wash in cold water on a delicate cycle with mild detergent. Hang up to dry and secure them during machine washing and drying to prevent them from coming open.
- Hand-wash in lukewarm water with mild soap and rinse thoroughly. Hang up to dry. Follow step 2 if using hand-washed fitted covers.
- Don’t put your fitted cover in the dryer! It will shrink and become loose. Allow your fitted cover to completely dry before storing, especially if you keep it inside the bag in which it came from the factory. Never put your fitted cover in a washing machine.
How to measure bed to get right size fitted sheet?
To find the right size fitted sheet, you’ll need to measure your bed’s length, width, and height. Measure the bed size accurately to fit the fitted sheet perfectly. You can also use a measuring tape to get an accurate measurement. Once you have the measurements, you can use the following tips to find the right size. If you have a Western-style bed with a headboard, measure the distance from the top of the headboard to the floor. This is your bed’s “base height. If you have a low or no-headboard bed, measure the distance from the floor to where you want your fitted sheet to cover the mattress; this is your bed’s base length. “To determine your bed’s width, subtract base length from base height. This is your bed’s “width. “To determine your bed’s depth, add width to base length. This is your bed’s “depth.”
Conclusion
When choosing the right size fitted cover for your mattress, it’s essential to keep a few things in mind. First and foremost, make sure that the cover is large enough to fit over all of your mattress’s edges. Second, consider how much insulation the cover will provide. Finally, check the cover’s seams for leaks and tears – if they exist, you may want to opt for a different model. Before buying, choose the material that is totally according to your needs. There are many different types of sleeper, you have to choose and make a purchase with your preferred material. With these tips in mind, you should be able to find the perfect fitted cover for your needs!
