How to Setup Linksys Extender?
The most easy way to boost the speed of your wifi network is to use the Linksys Extender Setup. It is particularly successful at delivering wifi signal to the network web’s interrupting dead spots (places of no signal). For instance, if your wifi router is located on the second level and you are unable to receive signals on the first floor, a Linksys Extender Setup is the ideal answer for you. By amplifying the wifi signal coming from the access point and then transferring it to the other devices, these wireless extenders essentially enhance the wifi coverage for a variety of online activities such as HD gaming, video streaming, surfing, and so on.
If you’re having problems with dead zones, use this new technology – Linksys wifi extender – and set it up using the process flow outlined in this post in the easiest and most comprehensive way possible.
How to set up a Linksys extender on smartphones?
The range extender can be used with any phone, including iPhones and Android phones. The only need is that the phone be connected to a working wifi network.
- To begin, connect your access point and wifi extender and wait for the solid green light to blink.
- Locate your device’s Wi-Fi settings and choose Wi-Fi name extender setup from the list of alternatives.
- Open your current web browser on the phone device as soon as the connection is established.
- In the search field, type the net address of your range extender.
- Follow all of the on-screen instructional prompts available on the screen after the extender setup page has opened.
- After that, select the Wi-Fi network on which you want your range extender to work.
- Disconnect the Linksys wifi extender and reconnect it after completing all of the preceding instructions.
- Finally, you’ve finished setting up your Linksys wifi extender.
How to set up a Linksys extender on a computer?
This is a time-consuming technique. But don’t worry; if you follow the instructions in the post step by step, you’ll be able to crack the code and set up the Linksys extender in a matter of minutes. The entire procedure has been broken down into three sections. So, begin by following the steps outlined below:
Method 1: Manually configure the Linksys extender
- The range extender and your computer or laptop should be in the same room.
- Connect your PC and extender via an ethernet connection.
- Connect the extender to the power outlet, as well as your computer.
- In the web browser’s address box, type extender.linksys.com.
- In the space provided on the login screen, enter your login information.
- Finally, select the radio button for the manual option. In the https://extender.linksys.com setup screen, type the network name of the wifi router, which is SSID.
- Select the security options that will affect the design of your switch.
- Save the settings after entering the WEP key or password.
- Turn the Linksys extender off for a few minutes before turning it back on.
Method 2: WPS Button setup for Linksys extender
WPS stands for Wifi Protected Setup, and it’s a popular method for establishing remote connections between devices. In a similar manner, you may set up your Linksys extender using the WPS button on the range extender or the web-based WPS button on the setup website at extender.linksys.com.
- Connect the range extender to an electrical outlet.
- For a few seconds, press and hold the WPS button on the extender, as this is the button that displays the status of the Linksys Extender setup-XXX network.
- When the range extender’s light starts flashing, it implies the range extender is starting the process of configuring the access point.
- When the LED light switches to green, it indicates that the Wifi extender configuration is complete.
Activating the WPS Button
- To begin, use the login credentials to access your Linksys account. Then select Wireless, followed by the WPS button.
- To begin the Wifi setup procedure, press the WPS Button on your range extender device.
- Finally, select Enable from the drop-down menu.
Using the pins on the router
- Enter the wifi router’s pin in the designated field on the https://extender.linksys.com configuration page if you choose this option.
- If the WPS LED light stays on all the time, it means your wifi setup was successful.
- Making Use of WPS Pin
- If your router device has a WPS Pin, simply type it into the second bar on the https://extender.linksys.com configuration page.
Setup your Linksys extender on your OS
Setting up the Linksys extender on your PC is critical. Detailed instructions for practically all regularly used operating systems are provided below:
– Mac Operating System
- Tap the Bookmarks tab on the Safari web browser.
- Locate the Bonjour option, which will show as a little drop-down menu.
- Double-click Linksys range extender to activate it.
- A prompt box will appear, inviting you to login to “RE6300” section
- Next, insert “admin” in the password field (or “admin” if you’ve changed the password key) and leave the user name field blank. Simply click ok or snap login as the final step to be taken to the http://extender.linksys.com website.
Note: If you don’t see a bookmark option in the list, go to Safari and select Preferences. Finally, in the Bookmarks menu, select Advanced and then Include Bonjour.
– Microsoft Windows 10
- Launch file explorer by pressing the Start button.
- Right-tap on the name of the Extender that appears on the left side.
- Select “view device web-page” from the drop-down option.
- After that, enter the assigned access information, which includes the username and password.
- The http/extender.linksys.com setup webpage will open in your default web browser as soon as you tap login.
– Microsoft Windows 8
- Select Search in the upper right corner of the window.
- Activate the charms bar. Choose Network app after typing “Network.”
- Now pick properties from the context menu of your Linksys Extender icon.
- Open your preferred web browser and type the IP address of the range extender into the address search field.
- A Windows Security box will appear; type “admin” in the password field and leave the user name field blank.
- Finally, press login or ok to be redirected to the http://extender.linksys.com website.
- Note: The default password key is “admin,” but if you’ve modified or altered it, you can use that instead.
– Microsoft Windows 7
- In the offered search space, tap the Pearl button and type “Windows Explorer.”
- Select the “Network” option in the Windows Explorer software.
- After that, right-click on the Linksys Extender logo and select Properties.
- Start your updated web browser and type the IP address of the range extender into the URL address box.
- Now type “admin” in the password field and leave the user name field blank in the Windows Security box.
- Finally, click OK or snap login, and the http://extender.linksys.com website will open on its own.
Note: The default password key is “admin,” but if you’ve modified or altered it, you can use that instead.
Windows XP
- In the offered search space, tap the Pearl button and type “Windows Explorer.”
- Choose Network from the Windows Explorer app.
- Now pick properties from the context menu of your Linksys Extender icon.
- Open your preferred web browser and type the IP address of the range extender into the address search field.
- A Windows Security box will appear; type “admin” in the password field and leave the user name field blank.
- To log in, press the login or ok buttons.