Worldwide Flanges Supplier for Oilfield Equipment
Flanges
Dedicated Impex FZE is a Supplier and Exporter of Flanges. Flanges are most commonly used in industrial processing systems. It is handling steam, water, air, and gas. These are available with all common tubing and casing threads in all API ranges.
These manufactured in different kind kinds of materials. The most common material is used forged carbon steel and has machine surfaces. The material of a flange mostly set during the choice of the pipe. But in many cases, flanges are of the same material as the pipe.
Flanges in general:
The flange is a device that can be used to connect the two pipes mechanically. The flange is a method of connecting with pipes, pumps, and other equipment to form a piping system. These are generally welded or screwed. Flanges like fitting and pipes, for a specific purpose. Flanges are available in many types like slip-on flanges, blind flanges, socket flanges, and weld neck flanges.
Characteristics of Flanges:
- The holes correctly drilled in the flange.
- Flanges are in order to maintain maximum power, and the grain flow is controlled.
- These flanges spot-facing would ensure the seating of the fasteners.
- The unrestricted flow obtained by accurate bore and smooth.
- Good welding facilitated by machined land and bevel.
Uses of Flanges:
We are Supplier of Flanges, used for various purposes and the need for flanges is increasing day by day. The main purpose of flanges to connect the pipes but they are used for connecting other equipment. The flanges used for many industrial applications. It is the best coupling method to join the two pipes. Flanges work properly if the components of the flange work properly.
Types of Flanges Faces:
- Flat face
- Ring joint face
- Raised face
- Male and Female face
- Tongue and Groove face
The most commonly used Flanges are:
-
Slip-on Flange:
Slip-on flanges are known as SO flanges. SO flanges are the most popular type of pipe flange. These flanges are a simple and excellent alternative to a weld neck. Flange slides over the pipe with an internal design that is slightly larger than the pipe. These flanges available at a lower cost. These flanges can work well after attaching to the end of a pipe or pipe fitting. This product is fit in easily and the end of the pipe is set back easily.
Features of the Slip-on Flange are:
- These flanges are available at less cost.
- The slip-on flange has a low hub as pipe slips into the flange before performing welding.
- These flanges are easy to align welded, both externally and internally.
-
Welding Neck Flanges:
Weld neck flange is also known as a high hub flange or tapered hub flange. These flanges are like lap joint flanges. Welding neck flanges require welding for installation. This flange is a flange that is designed to be joined to a piping system by butt welding. This type of flange include lots of specification. These flanges are expensive because of their long neck. The cost of people for contact weld neck flange with pipeline or fitting but id preferred for high-stress application. The neck transmits stresses to the pipeline.
3. Socket-Weld Flanges:
These types of flanges mostly used for the small-bore lines. Socket weld flange’s static strength is equal to slip-on flanges. But their fatigue strength is 50% higher than double-welded slip-on flanges. The Connection of the pipe is done with one fillet weld at the outside of the flange. Before welding, the space must be created with flange or fitting and pipe. The main purpose of socket weld flange is usually to reduce the residual stress at the root of the weld. This flange not allowed in some cases.
-
Threaded Flanges:
Threaded flanges are widely demanding as pipe flanges. It used in different industrial applications. The threaded flanges also called companion flanges or screwed flanges. It uses a screw thread to connect the flange to a pipe. This is a special type of pipe flange. They can be attached to the pipe without welding. The advantages of these flanges. They can be attached without welding But these types of flanges can be fitted to pipes of various sizes without welding.
Types of Threaded Flanges:
The Threaded flanges are two types. The first one is to seal the two pipes’ ends with a certain sealing surface. The other type is the same as normal flanges.
Threaded facing types:
Threaded flanges are two facing types. Raised face flange and Ring joint flange
Raised face flange: The raised face flange easily identified. It is compatible with a large range of gaskets. It is a flat to the metallic type and semi-metallic either ring or full. The main purpose of these flanges is to design to concentrate the pressure of the two mating flanges on a small surface.
Ring joint flange: The Ring Joint Flange has a circular groove. They can be used when metal-to-metal seals are required. It used especially in conditions of high pressure and high temperature.
5. Blind flanges: A blind flange is a solid flange. The purpose of these flanges is to block off a section of the pipeline or to create a stop. Blind flange plates, used for covering the ends of the pipes. These flanges have all relevant holes but no center hole. These flanges used to seal the ends of the piping system or pressure vessel opening.
Mostly, these flanges, used for testing the flow of a certain liquid or gas through a vessel or a pipe. These flanges are popular as they allow for easy access to the inside of the pipe. These flanges used for high-pressure applications.
Blind Flanges in general:
These flanges used for terminating or isolating piping systems, blind flanges are actually boltable blank discs. When the blind flanges installed properly and merged with the accurate gaskets. They can achieve an outstanding seal. Which is easy to remove. These flanges are the most important part of oilfield equipment.
Blind Flanges most commonly used:
These Types of flange commonly used in water works, public services, petrochemical, and pipe engineering.